Une approche micromécanique du comportement des polycristaux
Rev. Phys. Appl. (Paris), 23 4 (1988) 353-365
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Crystal plasticity model for describing the work hardening of A5052-O sheets subjected to various loading paths
Kengo YoshidaInternational Journal of Solids and Structures 291 112697 (2024)
https://doi.org/10.1016/j.ijsolstr.2024.112697
Formation of residual stresses during quenching of Ti17 and Ti–6Al–4V alloys: Influence of phase transformations
J. Teixeira, D. Maréchal, R.C. Wimpory, et al.Materials Science and Engineering: A 832 142456 (2022)
https://doi.org/10.1016/j.msea.2021.142456
A three-dimensional microstructure-based crystal plasticity model for coarse-grained and harmonic-structured Ti–6Al–4V under monotonic and cyclic shear loading
Xiang Wang, Jia Li, Fabien Cazes and Guy DirrasActa Mechanica 231 (12) 4991 (2020)
https://doi.org/10.1007/s00707-020-02780-x
A comparison of different crystal plasticity finite-element models on the simulation of nickel alloys
Zhengxuan Fan and Serge KruchMaterials at High Temperatures 37 (5) 328 (2020)
https://doi.org/10.1080/09603409.2020.1801951
Assessment of Power Plant Components With Flaws and Defects Operating in the Long-Term Creep Range
Magdalena Speicher, Thorben Bender, Andreas Klenk, et al.Journal of Engineering for Gas Turbines and Power 141 (11) (2019)
https://doi.org/10.1115/1.4045020
Multi-mechanism Modeling of Inelastic Material Behavior
Multi-mechanism Modeling of Inelastic Material Behavior 253 (2017)https://doi.org/10.1002/9781118845103.biblio
A micromechanical model of the viscoplastic behaviour of titanium accounting for its anisotropic and strain-rate-dependent viscosity
V. Doquet and B. BarkiaMechanics of Time-Dependent Materials 19 (2) 153 (2015)
https://doi.org/10.1007/s11043-015-9257-9
Elastic-viscoplastic notch correction methods
M. Chouman, A. Gaubert, J.L. Chaboche, et al.International Journal of Solids and Structures 51 (18) 3025 (2014)
https://doi.org/10.1016/j.ijsolstr.2014.04.017
Full‐Field Measurements and Identification in Solid Mechanics
Jérôme Crépin and Stéphane RouxFull‐Field Measurements and Identification in Solid Mechanics 411 (2013)
https://doi.org/10.1002/9781118578469.ch15
Modeling of latent hardening produced by complex loading paths in FCC alloys
C. Gérard, G. Cailletaud and B. BacroixInternational Journal of Plasticity 42 194 (2013)
https://doi.org/10.1016/j.ijplas.2012.10.010
Advanced Materials Modelling for Structures
Roxane Marull and Rodrigue DesmoratAdvanced Structured Materials, Advanced Materials Modelling for Structures 19 217 (2013)
https://doi.org/10.1007/978-3-642-35167-9_20
A self-consistent approach describing the strain induced anisotropy: Case of yield surface evolution
M. Radi and A. Abdul-LatifComputational Materials Science 54 356 (2012)
https://doi.org/10.1016/j.commatsci.2011.10.007
Phase field methods: Microstructures, mechanical properties and complexity
Alphonse Finel, Y. Le Bouar, A. Gaubert and U. SalmanComptes Rendus. Physique 11 (3-4) 245 (2010)
https://doi.org/10.1016/j.crhy.2010.07.014
Contribution à la modélisation expérimentale et numérique des instabilités plastiques en hydroformage des tôles minces
Mahfoudh Ayadi, Mohamed Ali Rezgui, Abel Cherouat, Faouzi Slimani and Mohamed Toumi NasriMécanique & Industries 10 (6) 503 (2009)
https://doi.org/10.1051/meca/2010009
Self consistent intragranular ductile damage modelling in large plasticity for FCC polycrystalline materials
N. Hfaiedh, K. Saanouni, M. François and A. RoosProcedia Engineering 1 (1) 229 (2009)
https://doi.org/10.1016/j.proeng.2009.06.054
An Overview of the Anatomy of Crystal Plasticity Models
Georges CailletaudAdvanced Engineering Materials 11 (9) 710 (2009)
https://doi.org/10.1002/adem.200900064
A multiphase mechanical model for Ti–6Al–4V: Application to the modeling of laser assisted processing
A. Longuet, Y. Robert, E. Aeby-Gautier, et al.Computational Materials Science 46 (3) 761 (2009)
https://doi.org/10.1016/j.commatsci.2009.05.012
Influence of boundary conditions on strain field analysis for polycrystalline finite element simulations
Eva Héripré, Jérôme Crépin, Arjen Roos and Jean-Louis ChabocheEuropean Journal of Computational Mechanics 18 (3-4) 333 (2009)
https://doi.org/10.3166/ejcm.18.333-351
Crack-tip stress–strain fields in single crystal nickel-base superalloys at high temperature under cyclic loading
N. Marchal, S. Flouriot, S. Forest and L. RemyComputational Materials Science 37 (1-2) 42 (2006)
https://doi.org/10.1016/j.commatsci.2005.12.014
Multiscale modelling of titanium aluminides
A. Roos, J.-L. Chaboche, L. Gélébart and J. CrépinInternational Journal of Plasticity 20 (4-5) 811 (2004)
https://doi.org/10.1016/j.ijplas.2003.08.005
Pertinence of the grains aggregate type on the self-consistent model responses
A. Abdul-LatifInternational Journal of Solids and Structures 41 (2) 305 (2004)
https://doi.org/10.1016/j.ijsolstr.2003.09.014
Modeling of the non-monotonous viscoplastic behavior of uranium dioxide
F Sauter and S LeclercqJournal of Nuclear Materials 322 (1) 1 (2003)
https://doi.org/10.1016/S0022-3115(03)00276-9
A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase B.C.C. polycrystals
Bart Peeters, Surya R. Kalidindi, Cristian Teodosiu, Paul Van Houtte and Etienne AernoudtJournal of the Mechanics and Physics of Solids 50 (4) 783 (2002)
https://doi.org/10.1016/S0022-5096(01)00094-1
The incorporation of dislocation sheets into a model for plastic deformation of b.c.c. polycrystals and its influence on r-values
B. Peeters, M. Seefeldt, S.R. Kalidindi, P. Van Houtte and E. AernoudtMaterials Science and Engineering: A 319-321 188 (2001)
https://doi.org/10.1016/S0921-5093(01)00948-0
A crystal plasticity based work-hardening/softening model for b.c.c. metals under changing strain paths
B. Peeters, S.R. Kalidindi, P. Van Houtte and E. AernoudtActa Materialia 48 (9) 2123 (2000)
https://doi.org/10.1016/S1359-6454(00)00047-1
Modeling of complex cyclic inelasticity in heterogeneous polycrystalline microstructure
A. Abdul-Latif, J.Ph. Dingli and K. SaanouniMechanics of Materials 30 (4) 287 (1998)
https://doi.org/10.1016/S0167-6636(98)00054-4
113 (1997)
https://doi.org/10.1520/STP16215S
IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials
P. Pilvin, X. Feaugas and M. ClavelSolid Mechanics and its Applications, IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials 46 141 (1996)
https://doi.org/10.1007/978-94-009-1756-9_18
Utilisation de modèles polycristallins pour le calcul par éléments finis
Georges Cailletaud and Philippe PilvinRevue Européenne des Éléments Finis 3 (4) 515 (1994)
https://doi.org/10.1080/12506559.1994.10511147
Anisotropic strain hardening in polycrystalline copper and aluminium
Felix HessInternational Journal of Plasticity 9 (4) 405 (1993)
https://doi.org/10.1016/0749-6419(93)90045-R
A micromechanical approach to inelastic behaviour of metals
G. CailletaudInternational Journal of Plasticity 8 (1) 55 (1992)
https://doi.org/10.1016/0749-6419(92)90038-E
Anisotropy and Localization of Plastic Deformation
P. Pilvin and G. CailletaudAnisotropy and Localization of Plastic Deformation 164 (1991)
https://doi.org/10.1007/978-94-011-3644-0_38
Creep in Structures
P. Pilvin and G. CailletaudCreep in Structures 171 (1991)
https://doi.org/10.1007/978-3-642-84455-3_21
Anisotropic strain hardening in F.C.C. polycrystals: A phenomenological model
F. Hess and A.W. SleeswykJournal of the Mechanics and Physics of Solids 37 (6) 735 (1989)
https://doi.org/10.1016/0022-5096(89)90016-1