EDP Sciences logo
Authentification abonné
Rechercher
Menu

Article cité par

La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).

Article cité :

Tensile/compression creep aging behavior of 2195-T34 Al-Li alloy under different stress levels

F. Chen, Y.J. Huang, H. Wang, Y.N. Jiang and Q.Q. Zeng
Materials Science and Engineering: A 935 148331 (2025)
https://doi.org/10.1016/j.msea.2025.148331

Determination and Modeling of the Plastic-Flow Behavior of a Strain- and Strain-Rate-Hardening Material via the Constant-Stress, Constant-Heating-Rate Test

S. L. Semiatin, N. C. Levkulich, P. N. Fagin, T. M. Butler, T. J. Bennett and E. M. Taleff
Metallurgical and Materials Transactions A 55 (12) 5206 (2024)
https://doi.org/10.1007/s11661-024-07614-2

Influence of Solid Solutions on the Al2024 High-Temperature Deformation Behavior

Oscar A. Ruano, Alberto Orozco-Caballero, Marta Álvarez-Leal and Fernando Carreño
Materials 16 (18) 6251 (2023)
https://doi.org/10.3390/ma16186251

Effect of nanoparticles on creep behaviour of metals: A review

Walaa Abd-Elaziem, Jingke Liu, Nasr Ghoniem and Xiaochun Li
Journal of Materials Research and Technology 26 3025 (2023)
https://doi.org/10.1016/j.jmrt.2023.08.068

Progression of creep deformation from grain boundaries to grain interior in Al-Cu-Mn-Zr alloys

J.U. Rakhmonov, B. Milligan, S. Bahl, D. Ma, A. Shyam and D.C. Dunand
Acta Materialia 250 118886 (2023)
https://doi.org/10.1016/j.actamat.2023.118886

The Effects of Impurity Content on Plastic Deformation and Microstructure Evolution in Niobium at Temperatures from 1473 K to 1773 K

Emily A. D. Brady and Eric M. Taleff
Metallurgical and Materials Transactions A 53 (8) 3057 (2022)
https://doi.org/10.1007/s11661-022-06726-x

Mechanical properties of NiAl–Cr alloys in relation to microstructure and atomic defects

Ralf Rablbauer, Rainer Fischer and Georg Frommeyer
International Journal of Materials Research 95 (6) 525 (2022)
https://doi.org/10.1515/ijmr-2004-0103

Deformation behavior during hot torsion of an ultrahigh carbon steel containing 1.3 wt.% C

A. Fernández-Vicente, M. Carsí, F. Peñalba, F. Carreño and O. A. Ruano
International Journal of Materials Research 94 (8) 922 (2022)
https://doi.org/10.1515/ijmr-2003-0164

The Effect of Ce on the Microstructure, Superplasticity, and Mechanical Properties of Al-Mg-Si-Cu Alloy

Andrey G. Mochugovskiy, Alexey S. Prosviryakov, Nataliya Yu. Tabachkova and Anastasia V. Mikhaylovskaya
Metals 12 (3) 512 (2022)
https://doi.org/10.3390/met12030512

Class I type creep behavior of coarse-grained Al0.5CoCrFeMnNi high entropy alloy

H.T. Jeong, H.K. Park and W.J. Kim
Materials Science and Engineering: A 845 143239 (2022)
https://doi.org/10.1016/j.msea.2022.143239

Deformation Behavior and Dynamic Recrystallization Mechanism(s) of AMS 5643 Stainless Steel

Z. Sangarimotlagh, B. Tolaminejad, A. Momeni and H. R. Jafarian
Metallography, Microstructure, and Analysis 11 (5) 790 (2022)
https://doi.org/10.1007/s13632-022-00890-7

Improving the mechanical properties of a WE54 magnesium alloy through severe friction stir processing and rapid cooling

Alberto Orozco-Caballero, Marta Álvarez-Leal, Oscar A. Ruano and Fernando Carreño
Materials Science and Engineering: A 856 143963 (2022)
https://doi.org/10.1016/j.msea.2022.143963

On the anisotropic indentation modulus and anisotropic creep behavior of β-Sn characterized by nanoindentation methods

B. Ernst, S. Keim and U. Tetzlaff
Materials Science and Engineering: A 848 143392 (2022)
https://doi.org/10.1016/j.msea.2022.143392

Superplasticity of a friction stir processed overaged WE54 magnesium alloy

Oscar A. Ruano, Marta Álvarez-Leal, Alberto Orozco-Caballero and Fernando Carreño
Journal of Magnesium and Alloys 10 (11) 3156 (2022)
https://doi.org/10.1016/j.jma.2022.02.008

Investigating the stress level impact on the creep rupture behaviour of 2195-T84 Al-Li alloy: Experimental and constitutive modelling

He Li, Lihua Zhan, Minghui Huang, Chunhui Liu, Xing Zhao, Chang Zhou and Fei Chen
International Journal of Damage Mechanics 30 (5) 700 (2021)
https://doi.org/10.1177/1056789520976747

Superplasticity and mechanical properties of Al–Mg–Si alloy doped with eutectic-forming Ni and Fe, and dispersoid-forming Sc and Zr elements

A.V. Mikhaylovskaya, M. Esmaeili Ghayoumabadi and A.G. Mochugovskiy
Materials Science and Engineering: A 817 141319 (2021)
https://doi.org/10.1016/j.msea.2021.141319

Low-temperature superplasticity of β-stabilized Ti-43Al-9V-Y alloy sheet with bimodal γ-grain-size distribution

Yu Zhang, Shuai Chang, Yuyong Chen, et al.
Journal of Materials Science & Technology 95 225 (2021)
https://doi.org/10.1016/j.jmst.2021.03.077

Plastic Deformation and Microstructure Evolution in Niobium at Temperatures from 1473 K to 1823 K

Emily A. D. Brady and Eric M. Taleff
Metallurgical and Materials Transactions A 52 (3) 1095 (2021)
https://doi.org/10.1007/s11661-020-06126-z

Characterization of Superplastic Deformation Behavior for a Novel Al-Mg-Fe-Ni-Zr-Sc Alloy: Arrhenius-Based Modeling and Artificial Neural Network Approach

Ahmed O. Mosleh, Anton D. Kotov, Anna A. Kishchik, Oleg V. Rofman and Anastasia V. Mikhaylovskaya
Applied Sciences 11 (5) 2208 (2021)
https://doi.org/10.3390/app11052208

Interaction of stress relaxation aging behavior and microstructural evolution in Inconel 718 alloy with different initial stress status

JiaJia Zhu, WuHua Yuan, Fei Peng and Qiang Fu
Journal of Materials Science 56 (24) 13814 (2021)
https://doi.org/10.1007/s10853-021-06144-1

Investigation on the asymmetric creep ageing behaviour of 2195-T84 Al–Li alloy under different tensile and compressive stress levels

He Li, Lihua Zhan, Minghui Huang, Xing Zhao and Chang Zhou
Intermetallics 131 107078 (2021)
https://doi.org/10.1016/j.intermet.2020.107078

High Strain Rate Superplasticity of WE54 Mg Alloy after Severe Friction Stir Processing

Marta Álvarez-Leal, Fernando Carreño, Alberto Orozco-Caballero, Pilar Rey and Oscar A. Ruano
Metals 10 (12) 1573 (2020)
https://doi.org/10.3390/met10121573

Recent Development of Superplasticity in Aluminum Alloys: A Review

Laxman Bhatta, Alexander Pesin, Alexander P. Zhilyaev, Puneet Tandon, Charlie Kong and Hailiang Yu
Metals 10 (1) 77 (2020)
https://doi.org/10.3390/met10010077

Superplasticity and dynamic microstructural evolutions in aluminum alloys

Hiroshi Masuda
Journal of Japan Institute of Light Metals 70 (6) 226 (2020)
https://doi.org/10.2464/jilm.70.226

“Ʌ”-shaped trend of stress relaxation stability of Inconel718 superalloy with initial stress increasing

Jing Yang, Jianxin Dong, He Jiang and Zhihao Yao
Materialia 9 100570 (2020)
https://doi.org/10.1016/j.mtla.2019.100570

Severe friction stir processing of an Al-Zn-Mg-Cu alloy: Misorientation and its influence on superplasticity

Alberto Orozco-Caballero, Oscar A. Ruano, Edgar F. Rauch and Fernando Carreño
Materials & Design 137 128 (2018)
https://doi.org/10.1016/j.matdes.2017.10.008

Superplasticity in a commercially extruded ZK30 magnesium alloy

Marta Álvarez-Leal, Alberto Orozco-Caballero, Fernando Carreño and Oscar A. Ruano
Materials Science and Engineering: A 710 240 (2018)
https://doi.org/10.1016/j.msea.2017.10.093

A Review on Superplastic Formation Behavior of Al Alloys

Xiao-guo Wang, Qiu-shu Li, Rui-rui Wu, Xiao-yuan Zhang, Liyun Ma and Guru P. Dinda
Advances in Materials Science and Engineering 2018 (1) (2018)
https://doi.org/10.1155/2018/7606140

Effect of rhenium on the microstructure and mechanical behavior of Fe–2.25Cr–1.6W–0.25V-0.1C bainitic steels

José Antonio Jiménez, Manuel Carsí and Oscar Antonio Ruano
Journal of Materials Science & Technology 33 (12) 1487 (2017)
https://doi.org/10.1016/j.jmst.2017.08.001

Evaluation of the mechanical anisotropy and the deformation mechanism in a multi-pass friction stir processed Al-Zn-Mg-Cu alloy

Alberto Orozco-Caballero, Marta Álvarez-Leal, David Verdera, et al.
Materials & Design 125 116 (2017)
https://doi.org/10.1016/j.matdes.2017.03.081

How magnesium accommodates local deformation incompatibility: A high-resolution digital image correlation study

Alberto Orozco-Caballero, David Lunt, Joseph D. Robson and João Quinta da Fonseca
Acta Materialia 133 367 (2017)
https://doi.org/10.1016/j.actamat.2017.05.040

Grain size versus microstructural stability in the high strain rate superplastic response of a severely friction stir processed Al-Zn-Mg-Cu alloy

Alberto Orozco-Caballero, Marta Álvarez-Leal, Paloma Hidalgo-Manrique, et al.
Materials Science and Engineering: A 680 329 (2017)
https://doi.org/10.1016/j.msea.2016.10.113

Influence of Grain Coarsening on the Creep Parameters During the Superplastic Deformation of a Severely Friction Stir Processed Al-Zn-Mg-Cu Alloy

Alberto Orozco-Caballero, Oscar A. Ruano and Fernando Carreño
Metallurgical and Materials Transactions A 48 (9) 3980 (2017)
https://doi.org/10.1007/s11661-017-4198-3

Densification mechanism and mechanical properties of tungsten powder consolidated by spark plasma sintering

G. Lee, J. McKittrick, E. Ivanov and E.A. Olevsky
International Journal of Refractory Metals and Hard Materials 61 22 (2016)
https://doi.org/10.1016/j.ijrmhm.2016.07.023

Superplasticity behaviors of Al-Zn-Mg-Zr cold-rolled alloy sheet with minor Sc addition

H. Xiang, Q.L. Pan, X.H. Yu, et al.
Materials Science and Engineering: A 676 128 (2016)
https://doi.org/10.1016/j.msea.2016.08.109

Superplastic behavior and microstructure evolution of a new Al-Mg-Sc-Zr alloy subjected to a simple thermomechanical processing

Y.L. Duan, L. Tang, Y. Deng, et al.
Materials Science and Engineering: A 669 205 (2016)
https://doi.org/10.1016/j.msea.2016.05.086

Strategy for severe friction stir processing to obtain acute grain refinement of an Al–Zn–Mg–Cu alloy in three initial precipitation states

A. Orozco-Caballero, P. Hidalgo-Manrique, C.M. Cepeda-Jiménez, et al.
Materials Characterization 112 197 (2016)
https://doi.org/10.1016/j.matchar.2015.12.014

Effect of Sc and Er additions on superplastic ductilities in Al-Mg-Mn-Zr alloy

Yu-lu Duan, Jian Qian, Dan Xiao, Xue-min Cui and Guo-fu Xu
Journal of Central South University 23 (6) 1283 (2016)
https://doi.org/10.1007/s11771-016-3178-x

A Review of Different Creep Mechanisms in Mg Alloys Based on Stress Exponent and Activation Energy 

Karuna Ratnakaran Athul, Uma Thanu Subramonia Pillai, Amirthalingam Srinivasan and Bellambettu Chandrasekhara Pai
Advanced Engineering Materials 18 (5) 770 (2016)
https://doi.org/10.1002/adem.201500393

Stress relaxation behavior and mechanism of AEREX350 and Waspaloy superalloys

Yuzhou Wang, Jianxin Dong, Maicang Zhang and Zhihao Yao
Materials Science and Engineering: A 678 10 (2016)
https://doi.org/10.1016/j.msea.2016.09.077

Influence of the Accumulative Roll Bonding Process Severity on the Microstructure and Superplastic Behaviour of 7075 Al Alloy

P. Hidalgo-Manrique, A. Orozco-Caballero, C.M. Cepeda-Jiménez, O.A. Ruano and F. Carreño
Journal of Materials Science & Technology 32 (8) 774 (2016)
https://doi.org/10.1016/j.jmst.2016.06.004

Superplasticity of high-strength Al-based alloys produced by thermomechanical treatment

A.D. Kotov, A.V. Mikhaylovskaya, M.S. Kishchik, et al.
Journal of Alloys and Compounds 688 336 (2016)
https://doi.org/10.1016/j.jallcom.2016.07.045

Achieving high strain rate superplasticity of an Al-Mg-Sc-Zr alloy by a new asymmetrical rolling technology

Guofu Xu, Xiaowu Cao, Tao Zhang, et al.
Materials Science and Engineering: A 672 98 (2016)
https://doi.org/10.1016/j.msea.2016.06.070

High temperature internal friction in a Ti–46Al–1Mo–0.2Si intermetallic, comparison with creep behaviour

M. Castillo-Rodríguez, M.L. Nó, J.A. Jiménez, O.A. Ruano and J. San Juan
Acta Materialia 103 46 (2016)
https://doi.org/10.1016/j.actamat.2015.09.052

Excellent superplasticity and deformation mechanism of Al–Mg–Sc–Zr alloy processed via simple free forging

Y.L. Duan, G.F. Xu, D. Xiao, et al.
Materials Science and Engineering: A 624 124 (2015)
https://doi.org/10.1016/j.msea.2014.11.054

Achieving high superplasticity of a new Al–Mg–Sc–Zr alloy sheet prepared by a simple thermal–mechanical process

Xiaowu Cao, Guofu Xu, Yulu Duan, et al.
Materials Science and Engineering: A 647 333 (2015)
https://doi.org/10.1016/j.msea.2015.08.052

Plastic deformation and ductility of magnesium AZ31B-H24 alloy sheet from 22 to 450°C

Aravindha R. Antoniswamy, Eric M. Taleff, Louis G. Hector and Jon T. Carter
Materials Science and Engineering: A 631 1 (2015)
https://doi.org/10.1016/j.msea.2015.02.018

Analysis of flow stress and deformation mechanism under hot working of ZK60 magnesium alloy by a new strain-dependent constitutive equation

D. Ciccarelli, M. El Mehtedi, A. Jäger and S. Spigarelli
Journal of Physics and Chemistry of Solids 87 183 (2015)
https://doi.org/10.1016/j.jpcs.2015.08.020

Achieving high superplasticity of a traditional thermal–mechanical processed non-superplastic Al–Zn–Mg alloy sheet by low Sc additions

Yulu Duan, GuoFu Xu, Liqi Zhou, et al.
Journal of Alloys and Compounds 638 364 (2015)
https://doi.org/10.1016/j.jallcom.2015.03.090

Effect of Sc and Zr additions on grain stability and superplasticity of the simple thermal–mechanical processed Al–Zn–Mg alloy sheet

Y.L. Duan, G.F. Xu, X.Y. Peng, et al.
Materials Science and Engineering: A 648 80 (2015)
https://doi.org/10.1016/j.msea.2015.09.049

Role of particles on microstructure and mechanical properties of the severely processed 7075 aluminium alloy

P. Hidalgo-Manrique, C. M. Cepeda-Jiménez, A. Orozco-Caballero, O. A. Ruano and F. Carreño
Journal of Materials Science 49 (2) 833 (2014)
https://doi.org/10.1007/s10853-013-7767-x

High Temperature Plasticity of Bimetallic Magnesium and Aluminum Friction Stir Welded Joints

Michael Regev, Mohamad El Mehtedi, Marcello Cabibbo, et al.
Metallurgical and Materials Transactions A 45 (2) 752 (2014)
https://doi.org/10.1007/s11661-013-2034-y

Influence of microstructural stability on the creep mechanism of Al–7wt% Si alloy processed by equal channel angular pressing

A. Orozco-Caballero, S.K. Menon, C.M. Cepeda-Jiménez, et al.
Materials Science and Engineering: A 612 162 (2014)
https://doi.org/10.1016/j.msea.2014.06.017

Stress relaxation behavior of an Al–Zn–Mg–Cu alloy in simulated age-forming process

J.F. Chen, J.T. Jiang, L. Zhen and W.Z. Shao
Journal of Materials Processing Technology 214 (4) 775 (2014)
https://doi.org/10.1016/j.jmatprotec.2013.08.017

Evolution of the microstructure, texture and creep properties of the 7075 aluminium alloy during hot accumulative roll bonding

P. Hidalgo-Manrique, C.M. Cepeda-Jiménez, A. Orozco-Caballero, O.A. Ruano and F. Carreño
Materials Science and Engineering: A 606 434 (2014)
https://doi.org/10.1016/j.msea.2014.03.105

Lowering the temperature for high strain rate superplasticity in an Al–Mg–Zn–Cu alloy via cooled friction stir processing

A. Orozco-Caballero, C.M. Cepeda-Jiménez, P. Hidalgo-Manrique, et al.
Materials Chemistry and Physics 142 (1) 182 (2013)
https://doi.org/10.1016/j.matchemphys.2013.06.055

Achieving microstructures prone to superplastic deformation in an Al–Zn–Mg–Cu alloy by equal channel angular pressing

C.M. Cepeda-Jiménez, J.M. García-Infanta, O.A. Ruano and F. Carreño
Journal of Alloys and Compounds 546 253 (2013)
https://doi.org/10.1016/j.jallcom.2012.08.084

Effect of warm accumulative roll bonding on the evolution of microstructure, texture and creep properties in the 7075 aluminium alloy

P. Hidalgo-Manrique, C.M. Cepeda-Jiménez, O.A. Ruano and F. Carreño
Materials Science and Engineering: A 556 287 (2012)
https://doi.org/10.1016/j.msea.2012.06.089

High strain rate superplasticity at intermediate temperatures of the Al 7075 alloy severely processed by equal channel angular pressing

C.M. Cepeda-Jiménez, J.M. García-Infanta, O.A. Ruano and F. Carreño
Journal of Alloys and Compounds 509 (40) 9589 (2011)
https://doi.org/10.1016/j.jallcom.2011.07.076

Microstructures and mechanical properties of Al-base composite materials reinforced by Al–Cu–Fe particles

G. Laplanche, A. Joulain, J. Bonneville, R. Schaller and T. El Kabir
Journal of Alloys and Compounds 493 (1-2) 453 (2010)
https://doi.org/10.1016/j.jallcom.2009.12.124

Creep properties and controlled creep mechanism of as-cast Mg-5Zn-2.5Er alloy

Han LI, Wen-bo DU, Jian-hui LI, Shu-bo LI and Zhao-hui WANG
Transactions of Nonferrous Metals Society of China 20 (7) 1212 (2010)
https://doi.org/10.1016/S1003-6326(09)60280-6

New numerical method for the fit of Garofalo equation and its application for predicting hot workability of a (V–N) microalloyed steel

I. Rieiro, M. Carsí and O. A. Ruano
Materials Science and Technology 25 (8) 995 (2009)
https://doi.org/10.1179/174328408X369429

An evidence of high strain rate superplasticity at intermediate homologous temperatures in an Al–Zn–Mg–Cu alloy processed by high-pressure torsion

J.M. García-Infanta, A.P. Zhilyaev, A. Sharafutdinov, O.A. Ruano and F. Carreño
Journal of Alloys and Compounds 473 (1-2) 163 (2009)
https://doi.org/10.1016/j.jallcom.2008.06.006

The effect of stress state on high-temperature deformation of fine-grained aluminum–magnesium alloy AA5083 sheet

Eric M. Taleff, Louis G. Hector, John R. Bradley, Ravi Verma and Paul E. Krajewski
Acta Materialia 57 (9) 2812 (2009)
https://doi.org/10.1016/j.actamat.2009.02.036

Influence of texture on dynamic recrystallization and deformation mechanisms in rolled or ECAPed AZ31 magnesium alloy

J.A. del Valle and O.A. Ruano
Materials Science and Engineering: A 487 (1-2) 473 (2008)
https://doi.org/10.1016/j.msea.2007.11.024

Characteristics of the Transition from Grain-Boundary Sliding to Solute Drag Creep in Superplastic AA5083

Terry R. McNelley, Keiichiro Oh-Ishi, Alexander P. Zhilyaev, et al.
Metallurgical and Materials Transactions A 39 (1) 50 (2008)
https://doi.org/10.1007/s11661-007-9401-5

Influence of grain size fluctuations on ductility of superplastic magnesium alloys processed by severe plastic deformation

J. A. del Valle and O. A. Ruano
Materials Science and Technology 24 (10) 1238 (2008)
https://doi.org/10.1179/174328407X213215

High-strength extruded Mg96Ni2Y1RE1 alloy exhibiting superplastic behaviour

P. Pérez, S. González, G. Garcés, G. Caruana and P. Adeva
Materials Science and Engineering: A 485 (1-2) 194 (2008)
https://doi.org/10.1016/j.msea.2007.07.083

Optimization of the microstructure for improving superplastic forming in magnesium alloys

J.A. del Valle, F. Peñalba and O.A. Ruano
Materials Science and Engineering: A 467 (1-2) 165 (2007)
https://doi.org/10.1016/j.msea.2007.02.088

Symbiosis between grain boundary sliding and slip creep to obtain high-strain-rate superplasticity in aluminum alloys

Jorge A. del Valle, M. Teresa Pérez-Prado and Oscar A. Ruano
Journal of the European Ceramic Society 27 (11) 3385 (2007)
https://doi.org/10.1016/j.jeurceramsoc.2007.02.185

Mechanical properties of NiAl–Cr alloys in relation to microstructure and atomic defects

Ralf Rablbauer, Rainer Fischer and Georg Frommeyer
Zeitschrift für Metallkunde 95 (6) 525 (2004)
https://doi.org/10.3139/146.017973

Deformation behavior during hot torsion of an ultrahigh carbon steel containing 1.3 wt.% C

A. Fernández–Vicente, M. Carsí, F. Peñalba, F. Carreño and O. A. Ruano
Zeitschrift für Metallkunde 94 (8) 922 (2003)
https://doi.org/10.3139/146.030922

Texture analysis of the transition from slip to grain boundary sliding in a discontinuously recrystallized superplastic aluminum alloy

M.T. Pérez-Prado, G. González-Doncel, O.A. Ruano and T.R. McNelley
Acta Materialia 49 (12) 2259 (2001)
https://doi.org/10.1016/S1359-6454(01)00128-8

Computer Simulation of Grain Boundary Character in a Superplastic Aluminum Alloy

T.R. McNelley and M.T. Peréz-Prado
MRS Proceedings 601 (1999)
https://doi.org/10.1557/PROC-601-3

Superplastic behavior of a kappa carbide material (Fe3AlCx)

Woo-Jin Kim, Oscar A. Ruano, Jeffrey Wolfenstine, Georg Frommeyer and Oleg D. Sherby
Journal of Materials Research 12 (9) 2317 (1997)
https://doi.org/10.1557/JMR.1997.0307