New trends in creep microstructural models for pure metals
Rev. Phys. Appl. (Paris), 22 3 (1987) 169-183
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Load transfer behavior in semisolid formed hypereutectic Al-Fe-based alloys during tensile creep
Wei Wang and Bo LiuMaterials Science and Engineering: A 914 147098 (2024)
https://doi.org/10.1016/j.msea.2024.147098
Statistical Comparison of Substructures in Pure Aluminum Before and After Creep Deformation, Based on EBSD Image Data
Philipp Rieder, Lukas Petrich, Itziar Serrano-Munoz, Ricardo Fernández, Giovanni Bruno and Volker SchmidtMicroscopy and Microanalysis 29 (6) 1889 (2023)
https://doi.org/10.1093/micmic/ozad121
Revisiting copper as a case study of creep in pure metals: Prediction of creep response in pure Cu in half-hard and friction-stir-processed states
C. Paoletti, E. Santecchia, M. Cabibbo, M. Regev and S. SpigarelliMaterials Science and Engineering: A 832 142426 (2022)
https://doi.org/10.1016/j.msea.2021.142426
Dislocation substructures in pure aluminium after creep deformation as studied by electron backscatter diffraction
Itziar Serrano-Munoz, Ricardo Fernández, Romeo Saliwan-Neumann, Gaspar González-Doncel and Giovanni BrunoJournal of Applied Crystallography 55 (4) 860 (2022)
https://doi.org/10.1107/S1600576722005209
Temperature Dependent Solid Solution Strengthening in the High Entropy Alloy CrMnFeCoNi in Single Crystalline State
Christian Gadelmeier, Sebastian Haas, Tim Lienig, Anna Manzoni, Michael Feuerbacher and Uwe GlatzelMetals 10 (11) 1412 (2020)
https://doi.org/10.3390/met10111412
A discrete dislocation dynamics model of creeping single crystals
M Rajaguru and S M KeralavarmaModelling and Simulation in Materials Science and Engineering 26 (3) 035007 (2018)
https://doi.org/10.1088/1361-651X/aaa789
In situ study of thermally activated flow and dynamic restoration of ultrafine-grained pure Cu at 373 K
Wolfgang Blum, Petr Král, Jiri Dvořák, et al.Journal of Materials Research 32 (24) 4514 (2017)
https://doi.org/10.1557/jmr.2017.343
Influence of Grain Coarsening on the Creep Parameters During the Superplastic Deformation of a Severely Friction Stir Processed Al-Zn-Mg-Cu Alloy
Alberto Orozco-Caballero, Oscar A. Ruano and Fernando CarreñoMetallurgical and Materials Transactions A 48 (9) 3980 (2017)
https://doi.org/10.1007/s11661-017-4198-3
Influence of microstructural stability on the creep mechanism of Al–7wt% Si alloy processed by equal channel angular pressing
A. Orozco-Caballero, S.K. Menon, C.M. Cepeda-Jiménez, et al.Materials Science and Engineering: A 612 162 (2014)
https://doi.org/10.1016/j.msea.2014.06.017
Rate-controlling mechanisms of hot deformation in a medium carbon vanadium microalloy steel
Haitao Zhao, Guoquan Liu and Lei XuMaterials Science and Engineering: A 559 262 (2013)
https://doi.org/10.1016/j.msea.2012.08.095
Dislocation dynamics simulations with climb: kinetics of dislocation loop coarsening controlled by bulk diffusion
Botond Bakó, Emmanuel Clouet, Laurent M. Dupuy and Marc BlétryPhilosophical Magazine 91 (23) 3173 (2011)
https://doi.org/10.1080/14786435.2011.573815
Control of dynamic recovery and strength by subgrain boundaries – insights from stress-change tests on CaF2single crystals
S. Mekala, P. Eisenlohr† and W. BlumPhilosophical Magazine 91 (6) 908 (2011)
https://doi.org/10.1080/14786435.2010.535324
Hot Deformation and Processing of Aluminum Alloys
Manufacturing Engineering and Materials Processing, Hot Deformation and Processing of Aluminum Alloys 20111578 87 (2011)https://doi.org/10.1201/b11227-5
UNIFIED TERMINOLOGY FOR STRAIN INDUCED BOUNDARIES
H.J. McQUEEN, E. EVANGELISTA, M. CABIBBO and G. AVRAMOVIC-CINGARACanadian Metallurgical Quarterly 47 (1) 71 (2008)
https://doi.org/10.1179/cmq.2008.47.1.71
Materials Science and Technology
Wolfgang BlumMaterials Science and Technology (2006)
https://doi.org/10.1002/9783527603978.mst0055
Phenomenological Model for Creep Behaviour in Cu-8.5at%Al Alloy
M. Abo-ElsoudDefect and Diffusion Forum 251-252 89 (2006)
https://doi.org/10.4028/www.scientific.net/DDF.251-252.89
Dislocation motion controlled by interactions with crystal lattice: modelling and experiments
D. Caillard and J. L. MartinInternational Materials Reviews 50 (6) 366 (2005)
https://doi.org/10.1179/174328005X67151
Stability and Motion of Low Angle Dislocation Boundaries in Precipitation Hardened Crystals
David Holec and Antonín DlouhýMaterials Science Forum 482 159 (2005)
https://doi.org/10.4028/www.scientific.net/MSF.482.159
Interactions between particles and low-angle dislocation boundaries during high-temperature deformation
David Holec and Antonín DlouhýZeitschrift für Metallkunde 96 (6) 558 (2005)
https://doi.org/10.3139/146.101070
Comments on ‘a model of continuous dynamic recrystallization’ proposed for aluminum
H.J. McQueen and M.E. KassnerScripta Materialia 51 (5) 461 (2004)
https://doi.org/10.1016/j.scriptamat.2004.05.027
Elevated-temperature deformation at forming rates of 10−2 to 102 s−1
H. J. McQueenMetallurgical and Materials Transactions A 33 (2) 345 (2002)
https://doi.org/10.1007/s11661-002-0096-3
Power-law and exponential creep in class M materials: discrepancies in experimental observations and implications for creep modeling
S.V. RajMaterials Science and Engineering: A 322 (1-2) 132 (2002)
https://doi.org/10.1016/S0921-5093(01)01126-1
Creep of crystalline materials: experimental basis, mechanisms and models
W BlumMaterials Science and Engineering: A 319-321 8 (2001)
https://doi.org/10.1016/S0921-5093(00)02010-4
A phenomenological description of primary creep in class M materials
S.V Raj and A.D FreedMaterials Science and Engineering: A 283 (1-2) 196 (2000)
https://doi.org/10.1016/S0921-5093(99)00790-X
Dynamic recovery: sufficient mechanism in the hot deformation of Al (<99.99)
H.J McQueen and W BlumMaterials Science and Engineering: A 290 (1-2) 95 (2000)
https://doi.org/10.1016/S0921-5093(00)00933-3
Current issues in recrystallization: a review
R.D. Doherty, D.A. Hughes, F.J. Humphreys, et al.Materials Science and Engineering: A 238 (2) 219 (1997)
https://doi.org/10.1016/S0921-5093(97)00424-3
Unified Constitutive Laws of Plastic Deformation
S.V. Raj, I.S. Iskovitz and A.D. FreedUnified Constitutive Laws of Plastic Deformation 343 (1996)
https://doi.org/10.1016/B978-012425970-6/50009-6
Energy dissipation efficiency in aluminum dependent on monotonic flow curves and dynamic recovery
H. J. McQueen, E. Evangelista, N. Jin and M. E. KassnerMetallurgical and Materials Transactions A 26 (7) 1757 (1995)
https://doi.org/10.1007/BF02670763
Analysis of creep transients in pure metals following stress changes
M. Biberger and J.C. GibelingActa Metallurgica et Materialia 43 (9) 3247 (1995)
https://doi.org/10.1016/0956-7151(95)00052-W
Metal forming: Industrial, mechanical computational and microstructural
H.J. McQueenJournal of Materials Processing Technology 37 (1-4) 3 (1993)
https://doi.org/10.1016/0924-0136(93)90078-K
Constant structure creep in metals after stress reduction in steady state stage
K. MiličkaActa Metallurgica et Materialia 41 (4) 1163 (1993)
https://doi.org/10.1016/0956-7151(93)90164-N
Subgrain boundary migration during creep of lif II. Constant-stress experiments
M. Biberger and W. BlumPhilosophical Magazine A 66 (1) 27 (1992)
https://doi.org/10.1080/01418619208201511
Deformation behavior of a Ni−30Al−20Fe−0.05Zr intermetallic alloy in the temperature range 300 to 1300 K
S. V. Raj, I. E. Locci and R. D. NoebeMetallurgical Transactions A 23 (6) 1705 (1992)
https://doi.org/10.1007/BF02804365
Creep behavior of copper at intermediate temperatures—III. A comparison with theory
S.V. Raj and T.G. LangdonActa Metallurgica et Materialia 39 (8) 1823 (1991)
https://doi.org/10.1016/0956-7151(91)90151-P
Cross-slip and work hardening of f.c.c. crystals
G. SaadaMaterials Science and Engineering: A 137 177 (1991)
https://doi.org/10.1016/0921-5093(91)90333-I
Creep substructure formation in sodium chloride single crystals in the power law and exponential creep regimes
S.V. Raj and G.M. PharrMaterials Science and Engineering: A 122 (2) 233 (1989)
https://doi.org/10.1016/0921-5093(89)90635-7
On the stability of the creep substructure in NaCl single crystals
S.V. Raj, G.M. Pharr and J.D. WhittenbergerMaterials Science and Engineering: A 113 161 (1989)
https://doi.org/10.1016/0921-5093(89)90303-1
Two mechanisms of dislocation motion during creep
W Blum, A Rosen, A Cegielska and J.L MartinActa Metallurgica 37 (9) 2439 (1989)
https://doi.org/10.1016/0001-6160(89)90041-2
Synchrotron radiation studies of defect structure evolution in aluminium during creep
Boris K. Barakhtin, Ilya A. Ovid'ko and P. SavichevaNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 282 (2-3) 651 (1989)
https://doi.org/10.1016/0168-9002(89)90073-9
The rate dependence and microstructure of high-purity silver deformed to large strains between 0.16 and 0.30T m
M. E. KassnerMetallurgical Transactions A 20 (10) 2001 (1989)
https://doi.org/10.1007/BF02650286
Une étude expérimentale et théorique du comportement en fluage biaxial de l'aluminium A5 (99,5 % en poids) aux températures intermédiaires (300 °C à 450 °C)
C. Lexcellent and J. BirocheauRevue de Physique Appliquée 24 (1) 1 (1989)
https://doi.org/10.1051/rphysap:019890024010100
Rate controlling processes in creep of close packed metals at intermediate and high temperatures
J. Bonneville, D. Caillard, M. Carrard and J.L. MartinRevue de Physique Appliquée 23 (4) 461 (1988)
https://doi.org/10.1051/rphysap:01988002304046100
Microscopic observations of glide in non close-packed planes in aluminium, and comparison with magnesium
A. Couret and D. CaillardActa Metallurgica 36 (9) 2515 (1988)
https://doi.org/10.1016/0001-6160(88)90197-6
High-strain steady-state flow in silver at ambient and near-ambient temperatures
M.E. Kassner and J.J. OldaniScripta Metallurgica 22 (1) 41 (1988)
https://doi.org/10.1016/S0036-9748(88)80303-X
Substructures in aluminium from dynamic and static recovery
H. J. McQueen and E. EvangelistaCzechoslovak Journal of Physics 38 (4) 359 (1988)
https://doi.org/10.1007/BF01605405