Numéro
Rev. Phys. Appl. (Paris)
Volume 24, Numéro 7, juillet 1989
Page(s) 699 - 709
DOI https://doi.org/10.1051/rphysap:01989002407069900
Rev. Phys. Appl. (Paris) 24, 699-709 (1989)
DOI: 10.1051/rphysap:01989002407069900

Surface defects in as-grown Ti3Al + V

I. Ehrhart1, M. Thomas1, A. Vassel1 et P. Veyssière2

1  ONERA, Direction des Matériaux, BP 72, 92322 Châtillon Cedex, France
2  LEM, CNRS-ONERA, BP 72, 92322 Châtillon Cedex, France


Abstract
A transmission electron microscope (TEM) investigation of surface defects contained in an as-grown Ti 3Al + V ordered alloy (DO19) was carried out and evidence was obtained for two categories of defects, namely antiphase boundaries (APB) and superlattice intrinsic stacking faults (SISF). APBs are nonplanar, they are thermal defects that were formed during alloy ordering ; they are often terminated by a superpartial with a 1/6 <11-20> Burgers vector. SISFs appear as groups of several unities, they do not originate from superdislocation dissociation but are part of closed superpartial loops with 1/3 <1-100> Burgers vector. SISFs and APBs may interact in order to give complex configurations that have been analyzed by TEM. Several different types of intersections between a SISF and an APB may occur which all indicate a rather weak interaction between a SISF and a 1/6 <11-20> superpartial.


Résumé
Les défauts bidimensionnels présents dans un alliage de Ti3Al + V brut de croissance (structure ordonnée DO19) sont étudiés par microscopie en transmission (MET). Ils sont de deux types, parois d'antiphase (APB) et fautes d'empilement sans défaut d'ordre (SISF). Les APB sont essentiellement des défauts thermiques gauches, apparus au cours de la mise en ordre et souvent bordés par une superpartielle de vecteur de Burgers 1/6 <11-20>. Les SISF forment des groupes de quelques unités, elles ne résultent pas de la dissociation de superdislocations mais sont présentes à l'intérieur de boucles fermées de vecteur de Burgers 1/3 <1-100>. Des interactions entre ces deux familles de défauts donnent lieu à des configurations complexes qui ont été analysées par MET. L'intersection d'une SISF et d'une APB peut se faire de diverses manières traduisant une attraction faible entre la SISF et la superpartielle de vecteur de Burgers 1/6 <11-20>.

PACS
6820 - Solid surface structure.
6170P - Stacking faults, stacking fault tetrahedra and other planar or extended defects.
6170N - Grain and twin boundaries.
6170J - Etch pits, decoration, transmission electron microscopy and other direct observations of dislocations.

Key words
aluminium alloys -- dislocation loops -- stacking faults -- surface structure -- titanium alloys -- transmission electron microscope examination of materials -- vanadium alloys -- transmission electron microscope -- surface defects -- ordered alloy -- antiphase boundaries -- superlattice intrinsic stacking faults -- thermal defects -- Burgers vector -- superpartial loops -- Ti sub 3 Al V